{"title":"Most Ordered by Hotels","description":"\u003cp\u003eCommercial door and glass hardware that hospitality properties order most often for entrances, lobbies, and back-of-house doors — heavy-duty continuous hinges, closers, locks, push\/pull handles, and glazing supplies built for high-traffic use.\u003c\/p\u003e","products":[{"product_id":"concealed-overhead-door-closer-fhc-fhcsm90h0-medium-duty-90-hold-open-1-2-inch-spindle","title":"Concealed Overhead Door Closer FHC FHCSM90H0 – Medium-Duty 90° Hold-Open 1\/2-Inch Spindle","description":"\u003cp\u003eSpecial order. Stock is confirmed after checkout. Email customerservice@emergencydoorandglassrepair.com if you are unsure this is the correct part. Orders over $5,000 can be paid by ACH; other orders use card checkout.\u003c\/p\u003e\n\u003cp\u003eCommercial storefront door closer replacement body for aluminum entrance headers. Medium-duty 90° hold-open concealed overhead closer with a 1\/2-inch spindle.\u003c\/p\u003e\u003ch3\u003eManufacturer identification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: FHC (Frameless Hardware Company)\u003c\/li\u003e\n\u003cli\u003eOfficial manufacturer part number: \u003cstrong\u003eFHCSM90H0\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFHC compare-to number: 20101M04\u003c\/li\u003e\n\u003cli\u003eProduct category: Concealed storefront \/ overhead concealed closer (OHCC) body\u003c\/li\u003e\n\u003cli\u003eUnit: Each\u003c\/li\u003e\n\u003cli\u003eCase quantity: 4 (manufacturer listing)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVerified specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoor type: Overhead concealed closer body for commercial aluminum storefront \/ entrance headers\u003c\/li\u003e\n\u003cli\u003eDoor width range (FHC OHCC installation manual for this body family): minimum 30 in; maximum 48 in\u003c\/li\u003e\n\u003cli\u003eDoor weight range (same family manual): maximum 250 lb interior \/ 200 lb exterior, including attached hardware\u003c\/li\u003e\n\u003cli\u003eSpindle type\/size: 1\/2-inch standard spindle (FHCSM series)\u003c\/li\u003e\n\u003cli\u003eHold-open or non-hold-open: Hold-open\u003c\/li\u003e\n\u003cli\u003eOpening degree: 90°\u003c\/li\u003e\n\u003cli\u003eHanding: Not stated on the FHC product page. Family manual describes these bodies as non-handed; confirm in the field.\u003c\/li\u003e\n\u003cli\u003eFinish: Not stated on the FHC product page\u003c\/li\u003e\n\u003cli\u003eListed product weight on FHC page: 0.000000 (placeholder, not a verified ship weight)\u003c\/li\u003e\n\u003cli\u003eSpring: Fixed medium-duty\u003c\/li\u003e\n\u003cli\u003eControls: Two valves for closing speed and latching speed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOHCC closer body\u003c\/li\u003e\n\u003cli\u003eMounting clips (included in package per FHC listing)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptional \/ sold separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTop arms, bottom pivots, cover plates, auxiliary stops\u003c\/li\u003e\n\u003cli\u003eLos Angeles-area installation — request a quote; not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation requirements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConcealed in an aluminum header or transom. Field verification required.\u003c\/li\u003e\n\u003cli\u003eFHC markets this series as interchangeable with most spring-powered closers. That is a manufacturer marketing phrase, not a fit guarantee from this shop.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty terms\u003c\/h3\u003e\u003cp\u003eManufacturer warranty is \u003cstrong\u003enot stated\u003c\/strong\u003e on the FHC product page reviewed August 16, 2026.\u003c\/p\u003e\u003ch3\u003eReturn restrictions\u003c\/h3\u003e\u003cp\u003eOpened or installed closers are likely non-returnable.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShipping weight: not stated (FHC lists 0.000000)\u003c\/li\u003e\n\u003cli\u003eShipping is calculated separately. This listing does \u003cstrong\u003enot\u003c\/strong\u003e include free shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003eCommercial door hardware is application-specific. Verify manufacturer, model, dimensions, handing, spindle, door type, and existing installation before ordering. If uncertain, text clear photos and measurements to 310-933-2600. Identification assistance does not replace field verification.\u003c\/p\u003e\u003ch3\u003eNeed help?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eText photos for identification: 310-933-2600\u003c\/li\u003e\n\u003cli\u003eEmail installation quotes and order questions to customerservice@emergencydoorandglassrepair.com. Replies are by email only.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalifornia Proposition 65 warning appears on the FHC product page.\u003c\/p\u003e","brand":"FHC","offers":[{"title":"Default Title","offer_id":43064344871008,"sku":"FHCSM90H0","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/1231\/1648\/files\/fhcm105nh0-1wr_d08e72d6-7f1b-42c2-94e1-6c50a28e7055.jpg?v=1787982480"},{"product_id":"continuous-geared-hinge-fhc-83hd2smsa-83-inch-full-surface-heavy-duty-satin-anodized","title":"Continuous Geared Hinge FHC 83HD2SMSA – 83-Inch Full-Surface Heavy-Duty Satin Anodized","description":"\u003cp\u003eSpecial order. Stock is confirmed after checkout. Email customerservice@emergencydoorandglassrepair.com if you are unsure this is the correct part. Orders over $5,000 can be paid by ACH; other orders use card checkout.\u003c\/p\u003e\n\u003cp\u003e83-inch heavy-duty full-surface continuous geared hinge. FHC 220 Series, satin anodized.\u003c\/p\u003e\u003ch3\u003eManufacturer identification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: FHC\u003c\/li\u003e\n\u003cli\u003eOfficial manufacturer part number: \u003cstrong\u003e83HD2SMSA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompare-to number listed by DK Hardware: 25083A\u003c\/li\u003e\n\u003cli\u003eProduct category: Continuous geared hinge, full surface\u003c\/li\u003e\n\u003cli\u003eUnit: Each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVerified specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoor type: Full-surface continuous hinge for commercial doors\u003c\/li\u003e\n\u003cli\u003eLength: 83 in (FHC also stocks 95 in and 120 in in this family; there is no 85 in stock length)\u003c\/li\u003e\n\u003cli\u003eDoor weight range: heavy-duty hinges for doors up to \u003cstrong\u003e600 lb\u003c\/strong\u003e (DK Hardware listing for this SKU)\u003c\/li\u003e\n\u003cli\u003eFinish: Satin anodized\u003c\/li\u003e\n\u003cli\u003eHanding: continuous hinge; confirm prep and swing in the field\u003c\/li\u003e\n\u003cli\u003eSpindle \/ hold-open \/ opening degree: not applicable\u003c\/li\u003e\n\u003cli\u003eThis is a full-surface 220 Series hinge. Concealed-leaf 330\/440 Series hinges are not interchangeable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHinge\u003c\/li\u003e\n\u003cli\u003eMounting hardware included in package (FHC listing)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptional \/ sold separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplacement screw packs\u003c\/li\u003e\n\u003cli\u003eLos Angeles-area installation — request a quote; not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation requirements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-surface mount. Confirm door height, weight, and whether the existing hinge is full-surface or concealed-leaf.\u003c\/li\u003e\n\u003cli\u003eMay be cut to length only if manufacturer cutting rules are confirmed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty terms\u003c\/h3\u003e\u003cp\u003eNot stated on the FHC product page reviewed August 16, 2026.\u003c\/p\u003e\u003ch3\u003eReturn restrictions\u003c\/h3\u003e\u003cp\u003eCut or installed hinges are likely non-returnable.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFHC lists a weight field of 9.000000 and ships UPS. Treat as unverified until packed.\u003c\/li\u003e\n\u003cli\u003eShipping is calculated separately. This listing does \u003cstrong\u003enot\u003c\/strong\u003e include free shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003eCommercial door hardware is application-specific. Verify manufacturer, model, dimensions, handing, spindle, door type, and existing installation before ordering. If uncertain, text clear photos and measurements to 310-933-2600. Identification assistance does not replace field verification.\u003c\/p\u003e\u003ch3\u003eNeed help?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eText photos for identification: 310-933-2600\u003c\/li\u003e\n\u003cli\u003eEmail installation quotes and order questions to customerservice@emergencydoorandglassrepair.com. Replies are by email only.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FHC","offers":[{"title":"Default Title","offer_id":43064345264224,"sku":"83HD2SMSA","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/1231\/1648\/files\/83hd2smsa-1w.jpg?v=1786989990"},{"product_id":"surface-mounted-door-closer-fhc-sc1804-1800-series-grade-1-fixed-spring","title":"Surface-Mounted Door Closer FHC SC1804 – 1800 Series Grade 1 Fixed Spring","description":"\u003cp\u003eSpecial order. Stock is confirmed after checkout. Email customerservice@emergencydoorandglassrepair.com if you are unsure this is the correct part. Orders over $5,000 can be paid by ACH; other orders use card checkout.\u003c\/p\u003e\n\u003cp\u003eSurface-mounted commercial door closer. FHC 1800 Series Grade 1 fixed-spring closer for aluminum storefront and similar commercial doors. Distributor listings often add a finish suffix such as SC1804SA (satin anodized).\u003c\/p\u003e\u003ch3\u003eManufacturer identification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: FHC\u003c\/li\u003e\n\u003cli\u003eOfficial manufacturer part number: \u003cstrong\u003eSC1804\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct category: Surface-mounted commercial closer\u003c\/li\u003e\n\u003cli\u003eUnit: Each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVerified specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoor type: Narrow-body surface closer for most aluminum storefront doors (FHC wording). Confirm frame and top-rail prep.\u003c\/li\u003e\n\u003cli\u003eDoor width \/ weight range: not stated as a single range on the FHC product page. Size is fixed spring (not 1–6 adjustable). Confirm size 2\/3 vs 4\/5 before ordering.\u003c\/li\u003e\n\u003cli\u003eBody length (FHC 1800 data sheet): Size 2 \u0026amp; 3 = 8-7\/8 in; Size 4 \u0026amp; 5 = 9-3\/4 in\u003c\/li\u003e\n\u003cli\u003eSpindle type\/size: not applicable (surface closer)\u003c\/li\u003e\n\u003cli\u003eHold-open or non-hold-open: not stated on the FHC product page\u003c\/li\u003e\n\u003cli\u003eOpening degree: not stated on the FHC product page\u003c\/li\u003e\n\u003cli\u003eHanding: not stated as handed on the FHC product page; confirm in the field\u003c\/li\u003e\n\u003cli\u003eFinish: order the finish suffix separately (example: SA satin anodized)\u003c\/li\u003e\n\u003cli\u003eFHC states ANSI 156.4 Grade 1 and ADA\/ANSI 117.1 compliance on the product page. Recheck the data sheet before advertising those claims.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCloser body\u003c\/li\u003e\n\u003cli\u003eParallel arm bracket (FHC listing)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOptional \/ sold separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHold-open or specialty arms\u003c\/li\u003e\n\u003cli\u003eSex nuts \/ through-bolts for aluminum or hollow doors\u003c\/li\u003e\n\u003cli\u003eLos Angeles-area installation — request a quote; not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation requirements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSurface mount. Confirm regular-arm, parallel-arm, or top-jamb application and hole pattern.\u003c\/li\u003e\n\u003cli\u003eFixed spring — do not treat this as an adjustable multi-size closer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty terms\u003c\/h3\u003e\u003cp\u003eFHC product page states a \u003cstrong\u003e5 Year Limited Warranty\u003c\/strong\u003e. Terms were not fetched in full. Do not expand that claim.\u003c\/p\u003e\u003ch3\u003eReturn restrictions\u003c\/h3\u003e\u003cp\u003eOpened or installed closers are likely non-returnable.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShipping weight: not stated\u003c\/li\u003e\n\u003cli\u003eShipping is calculated separately. This listing does \u003cstrong\u003enot\u003c\/strong\u003e include free shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003eCommercial door hardware is application-specific. Verify manufacturer, model, dimensions, handing, spindle, door type, and existing installation before ordering. If uncertain, text clear photos and measurements to 310-933-2600. Identification assistance does not replace field verification.\u003c\/p\u003e\u003ch3\u003eNeed help?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eText photos for identification: 310-933-2600\u003c\/li\u003e\n\u003cli\u003eEmail installation quotes and order questions to customerservice@emergencydoorandglassrepair.com. Replies are by email only.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FHC","offers":[{"title":"Default Title","offer_id":43064345329760,"sku":"SC1804","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/1231\/1648\/files\/sc1804sa-1w_1.jpg?v=1787982476"},{"product_id":"thumbturn-mortise-cylinder-fhc-rct20112-1-1-2-inch-with-3-mm-trim-ring","title":"Thumbturn Mortise Cylinder FHC RCT20112 – 1-1\/2-Inch with 3 mm Trim Ring","description":"\u003cp\u003eSpecial order. Stock is confirmed after checkout. Email customerservice@emergencydoorandglassrepair.com if you are unsure this is the correct part. Orders over $5,000 can be paid by ACH; other orders use card checkout.\u003c\/p\u003e\n\u003cp\u003eMortise thumbturn cylinder. 1-1\/2 inches long with a 3 mm trim ring. Confirm length against door thickness before ordering. Adams Rite 4066 is typically 1 inch long — not the same part.\u003c\/p\u003e\u003ch3\u003eManufacturer identification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: FHC\u003c\/li\u003e\n\u003cli\u003eOfficial manufacturer part number: \u003cstrong\u003eRCT20112\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct category: Thumbturn mortise cylinder\u003c\/li\u003e\n\u003cli\u003eUnit: Each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVerified specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength: 1-1\/2 in\u003c\/li\u003e\n\u003cli\u003eTrim ring: 3 mm\u003c\/li\u003e\n\u003cli\u003eFinishes: four architectural finishes (FHC). Confirm suffix before order.\u003c\/li\u003e\n\u003cli\u003eDoor type \/ width \/ weight \/ spindle \/ hold-open \/ opening degree: not applicable\u003c\/li\u003e\n\u003cli\u003eHanding: not handed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eThumbturn cylinder with 3 mm trim ring\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eOptional \/ sold separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMatching mortise cylinder\u003c\/li\u003e\n\u003cli\u003eLock body\u003c\/li\u003e\n\u003cli\u003eLos Angeles-area installation — request a quote; not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation requirements\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCylinder length must match door thickness plus trim ring.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty terms\u003c\/h3\u003e\u003cp\u003eNot stated on the FHC product page reviewed August 16, 2026.\u003c\/p\u003e\u003ch3\u003eReturn restrictions\u003c\/h3\u003e\u003cp\u003eInstalled thumbturns are likely non-returnable.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShipping weight: not stated\u003c\/li\u003e\n\u003cli\u003eShipping is calculated separately. This listing does \u003cstrong\u003enot\u003c\/strong\u003e include free shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003eCommercial door hardware is application-specific. Verify manufacturer, model, dimensions, handing, spindle, door type, and existing installation before ordering. If uncertain, text clear photos and measurements to 310-933-2600. Identification assistance does not replace field verification.\u003c\/p\u003e\u003ch3\u003eNeed help?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eText photos for identification: 310-933-2600\u003c\/li\u003e\n\u003cli\u003eEmail installation quotes and order questions to customerservice@emergencydoorandglassrepair.com. Replies are by email only.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FHC","offers":[{"title":"Default Title","offer_id":43064345428064,"sku":"RCT20112","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/1231\/1648\/files\/rct20112bs-1wr.jpg?v=1786990009"},{"product_id":"storefront-deadlatch-fhc-45132l-31-32-inch-backset-left-hand","title":"Storefront Deadlatch FHC 45132L – 31\/32-Inch Backset Left-Hand","description":"\u003cp\u003eSpecial order. Stock is confirmed after checkout. Email customerservice@emergencydoorandglassrepair.com if you are unsure this is the correct part. Orders over $5,000 can be paid by ACH; other orders use card checkout.\u003c\/p\u003e\n\u003cp\u003eNarrow-stile deadlatch body. This listing is the specific FHC item \u003cstrong\u003e45132L\u003c\/strong\u003e: left hand, 31\/32-inch backset. This is an FHC part. The words “Adams Rite” on the FHC product name mean compatibility style, not Adams Rite brand. FHC compare-to number is AR45132L.\u003c\/p\u003e\u003ch3\u003eManufacturer identification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: FHC\u003c\/li\u003e\n\u003cli\u003eOfficial manufacturer part number: \u003cstrong\u003e45132L\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct category: Narrow-stile deadlatch\u003c\/li\u003e\n\u003cli\u003eUnit: Each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVerified specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoor type: Narrow-stile aluminum storefront\u003c\/li\u003e\n\u003cli\u003eBackset: \u003cstrong\u003e31\/32 in\u003c\/strong\u003e (FHC product title). FHC also prints a series bullet “31\/32 or 1-1\/8 in cylinder backset” — that does not make this SKU both sizes.\u003c\/li\u003e\n\u003cli\u003eHanding: \u003cstrong\u003eLeft hand\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eThrow: 1\/2 in x 1 in x 1\/2 in (FHC product page)\u003c\/li\u003e\n\u003cli\u003eCase: 1 in x 5-13\/16 in; depth varies by backset (FHC product page)\u003c\/li\u003e\n\u003cli\u003eCylinder: not included. Confirm cam and 1-5\/32 in mortise cylinder on the packed part.\u003c\/li\u003e\n\u003cli\u003eDoor width \/ weight \/ spindle \/ hold-open \/ opening degree: not applicable\u003c\/li\u003e\n\u003cli\u003eFinish: not stated on the FHC product page\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNot this SKU\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4513 — FHC 1-1\/8 in right hand\u003c\/li\u003e\n\u003cli\u003e4513L — FHC 1-1\/8 in left hand\u003c\/li\u003e\n\u003cli\u003e45132R — FHC 31\/32 in right hand\u003c\/li\u003e\n\u003cli\u003eAdams Rite 4510-35-201 and Adams Rite 4513-IB — different manufacturer listings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDeadlatch body (confirm faceplate and strike on the packed part)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eOptional \/ sold separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMortise cylinder and thumbturn\u003c\/li\u003e\n\u003cli\u003eStrike and faceplate if not in the box\u003c\/li\u003e\n\u003cli\u003eLos Angeles-area installation — request a quote; not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation requirements\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConfirm handing and backset. Photos look the same across four common combinations.\u003c\/li\u003e\n\u003cli\u003eOrder by manufacturer + part number. Do not treat FHC 45132L as Adams Rite brand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty terms\u003c\/h3\u003e\u003cp\u003eNot stated on the FHC product page reviewed August 17, 2026.\u003c\/p\u003e\u003ch3\u003eReturn restrictions\u003c\/h3\u003e\u003cp\u003eInstalled latches are likely non-returnable.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFHC page weight field: 0.00 (not usable as a carton weight)\u003c\/li\u003e\n\u003cli\u003eShipping is calculated separately. This listing does \u003cstrong\u003enot\u003c\/strong\u003e include free shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003eCommercial door hardware is application-specific. Verify manufacturer, model, dimensions, handing, spindle, door type, and existing installation before ordering. If uncertain, text clear photos and measurements to 310-933-2600. Identification assistance does not replace field verification.\u003c\/p\u003e\u003ch3\u003eNeed help?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eText photos for identification: 310-933-2600\u003c\/li\u003e\n\u003cli\u003eEmail installation quotes and order questions to customerservice@emergencydoorandglassrepair.com. Replies are by email only.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FHC","offers":[{"title":"Default Title","offer_id":43064345493600,"sku":"45132L","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/1231\/1648\/files\/45132l-1w.jpg?v=1787002726"},{"product_id":"door-sweep-fhc-867048-48-inch-brush-sweep-concealed-fasteners","title":"Door Sweep FHC 867048 – 48-Inch Brush Sweep Satin Anodized","description":"\u003cp\u003eSpecial order. Stock is confirmed after checkout. Email customerservice@emergencydoorandglassrepair.com if you are unsure this is the correct part. Orders over $5,000 can be paid by ACH; other orders use card checkout.\u003c\/p\u003e\n\u003cp\u003eThis SKU is the 48-inch brush sweep, satin \/ clear anodized. Distributor finish code is \u003cstrong\u003e867048CA\u003c\/strong\u003e. Bronze (AA) is a different finish. FHC’s product name is “FHC 48\" Long Door Sweep with Brush, Concealed Fasteners.” One FHC bullet on the same page still says “84\" Length Door Sweep.” That 84-inch line is treated as a page error: FHC sells 867084 as the 84-inch sibling. Measure the packed part before install.\u003c\/p\u003e\u003ch3\u003eManufacturer identification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: FHC\u003c\/li\u003e\n\u003cli\u003eOfficial manufacturer part number: \u003cstrong\u003e867048\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFinish SKU used on distributor pages: 867048CA\u003c\/li\u003e\n\u003cli\u003eProduct category: Door sweep\u003c\/li\u003e\n\u003cli\u003eUnit: Each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVerified specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength for this SKU: 48 in (FHC product name, part-number 48 suffix, and DK Hardware 867048CA). Not 867036 (36 in) and not 867084 (84 in).\u003c\/li\u003e\n\u003cli\u003eDo not sell this as an 84-inch sweep.\u003c\/li\u003e\n\u003cli\u003eInsert: FHC states rubber-strip \/ brush sweep\u003c\/li\u003e\n\u003cli\u003eFasteners: concealed\u003c\/li\u003e\n\u003cli\u003eFinish: satin anodized (clear). Owner invoice line: “48\" Long Door Sweep with Brush, Concealed Fasteners - Satin Anodized.”\u003c\/li\u003e\n\u003cli\u003eHanding: not handed\u003c\/li\u003e\n\u003cli\u003eDoor weight \/ spindle \/ hold-open \/ opening degree: not applicable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSweep assembly (fastener pack not independently verified)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eOptional \/ sold separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e867084 for an 84-inch sweep\u003c\/li\u003e\n\u003cli\u003eBronze finish 867048AA if the opening is dark bronze — not this listing\u003c\/li\u003e\n\u003cli\u003eLos Angeles-area installation — request a quote; not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation requirements\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMeasure the door, finish, and the packed part before install. Cut or installed sweeps are likely non-returnable.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty terms\u003c\/h3\u003e\u003cp\u003eNot stated on the FHC product page reviewed August 17, 2026.\u003c\/p\u003e\u003ch3\u003eReturn restrictions\u003c\/h3\u003e\u003cp\u003eCut or installed sweeps are likely non-returnable.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShipping weight: not stated\u003c\/li\u003e\n\u003cli\u003eShipping is calculated separately. This listing does \u003cstrong\u003enot\u003c\/strong\u003e include free shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003eCommercial door hardware is application-specific. Verify manufacturer, model, dimensions, handing, spindle, door type, and existing installation before ordering. If uncertain, text clear photos and measurements to 310-933-2600. Identification assistance does not replace field verification.\u003c\/p\u003e\u003ch3\u003eNeed help?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eText photos for identification: 310-933-2600\u003c\/li\u003e\n\u003cli\u003eEmail installation quotes and order questions to customerservice@emergencydoorandglassrepair.com. Replies are by email only.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FHC","offers":[{"title":"Default Title","offer_id":43064345657440,"sku":"867048","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/1231\/1648\/files\/867084ca-1w_3_1_607b61bc-913b-42c0-b2a1-e88bd460c28f.jpg?v=1786990027"},{"product_id":"rain-drip-fhc-dr72-72-inch-2-1-2-by-5-8-inch-drip-rail","title":"Rain Drip FHC DR72 – 72-Inch 2-1\/2 by 5\/8-Inch Drip Rail","description":"\u003cp\u003eSpecial order. Stock is confirmed after checkout. Email customerservice@emergencydoorandglassrepair.com if you are unsure this is the correct part. Orders over $5,000 can be paid by ACH; other orders use card checkout.\u003c\/p\u003e\n\u003cp\u003e72-inch rain drip rail. FHC DR72, 2-1\/2 inches by 5\/8 inch. Long extrusion — freight may apply.\u003c\/p\u003e\u003ch3\u003eManufacturer identification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: FHC\u003c\/li\u003e\n\u003cli\u003eOfficial manufacturer part number: \u003cstrong\u003eDR72\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct category: Rain drip\u003c\/li\u003e\n\u003cli\u003eUnit: Each\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVerified specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength: 72 in\u003c\/li\u003e\n\u003cli\u003eProfile: 2-1\/2 in × 5\/8 in (FHC product name)\u003c\/li\u003e\n\u003cli\u003eDoor type: overhead drip at the head of an exterior door\u003c\/li\u003e\n\u003cli\u003eHanding \/ spindle \/ hold-open \/ opening degree: not applicable\u003c\/li\u003e\n\u003cli\u003eFinish: not stated on the FHC page used for this draft — confirm before order\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDrip rail (fasteners not independently verified)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eOptional \/ sold separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMatching threshold\u003c\/li\u003e\n\u003cli\u003eLos Angeles-area installation — request a quote; not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation requirements\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eConfirm door width, head condition, and finish. Oversized lengths may ship freight.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty terms\u003c\/h3\u003e\u003cp\u003eNot stated on the FHC product page reviewed August 16, 2026. NGP 16A (a different brand) is listed with a 5-year warranty — do not apply that to FHC DR72.\u003c\/p\u003e\u003ch3\u003eReturn restrictions\u003c\/h3\u003e\u003cp\u003eCut or installed drip rails are likely non-returnable.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e72-inch extrusion. Shipping is calculated separately. This listing does \u003cstrong\u003enot\u003c\/strong\u003e include free shipping.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003eCommercial door hardware is application-specific. Verify manufacturer, model, dimensions, handing, spindle, door type, and existing installation before ordering. If uncertain, text clear photos and measurements to 310-933-2600. Identification assistance does not replace field verification.\u003c\/p\u003e\u003ch3\u003eNeed help?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eText photos for identification: 310-933-2600\u003c\/li\u003e\n\u003cli\u003eEmail installation quotes and order questions to customerservice@emergencydoorandglassrepair.com. Replies are by email only.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FHC","offers":[{"title":"Default Title","offer_id":43064345690208,"sku":"DR72","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/1231\/1648\/files\/dr72sa-1w.jpg?v=1786990062"},{"product_id":"glazing-gasket-fhc-7700rl-dense-epdm-roll-for-storefront-glass","title":"Glazing Gasket FHC 7700RL – Neoprene Center-Glaze Roll 300 Feet","description":"\u003cp\u003eSpecial order. Stock is confirmed after checkout. Email customerservice@emergencydoorandglassrepair.com if you are unsure this is the correct part. Orders over $5,000 can be paid by ACH; other orders use card checkout.\u003c\/p\u003e\n\u003cp\u003eFHC 7700RL is an aluminum-storefront neoprene center-glaze gasket sold as a 300-foot roll. It is not a dense-EPDM listing. Profile must match the existing pocket. Wrong gasket will not hold glass or weather the opening.\u003c\/p\u003e\u003ch3\u003eManufacturer identification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: FHC\u003c\/li\u003e\n\u003cli\u003eOfficial manufacturer part number: \u003cstrong\u003e7700RL\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOfficial FHC name: Aluminum Neoprene Center Glaze Storefront Gasket — 300' Roll\u003c\/li\u003e\n\u003cli\u003eProduct category: Glazing gasket\u003c\/li\u003e\n\u003cli\u003eUnit: Roll (RL), 300 ft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVerified specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: neoprene (FHC product name). Not listed as EPDM. FHC sibling 7712RL \/ 7738RL are the EPDM top-load gaskets.\u003c\/li\u003e\n\u003cli\u003eRoll length: 300 ft\u003c\/li\u003e\n\u003cli\u003eGlass: FHC states 1\/4 in and 1 in\u003c\/li\u003e\n\u003cli\u003eFrames: FHC states 100, 200, and 200T series storefronts\u003c\/li\u003e\n\u003cli\u003eUse: interior and exterior sides (FHC)\u003c\/li\u003e\n\u003cli\u003eHanding \/ spindle \/ hold-open \/ opening degree: not applicable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eOne 300 ft roll (setting blocks sold separately)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eOptional \/ sold separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFHC NSB563 setting blocks\u003c\/li\u003e\n\u003cli\u003eLos Angeles-area installation — request a quote; not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation requirements\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMatch profile, durometer, and pocket. Glass work should be performed by a qualified installer.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty terms\u003c\/h3\u003e\u003cp\u003eNot stated on the FHC product page reviewed August 17, 2026.\u003c\/p\u003e\u003ch3\u003eReturn restrictions\u003c\/h3\u003e\u003cp\u003eOpened gasket rolls are likely non-returnable.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e300 ft bulk roll. Shipping is calculated separately. This listing does \u003cstrong\u003enot\u003c\/strong\u003e include free shipping.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003eCommercial door hardware is application-specific. Verify manufacturer, model, dimensions, handing, spindle, door type, and existing installation before ordering. If uncertain, text clear photos and measurements to 310-933-2600. Identification assistance does not replace field verification.\u003c\/p\u003e\u003ch3\u003eNeed help?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eText photos for identification: 310-933-2600\u003c\/li\u003e\n\u003cli\u003eEmail installation quotes and order questions to customerservice@emergencydoorandglassrepair.com. Replies are by email only.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FHC","offers":[{"title":"Default Title","offer_id":43064346214496,"sku":"7700RL","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/1231\/1648\/files\/7700rl-1w.jpg?v=1786990009"},{"product_id":"push-pull-handle-fhc-891348aa-48-inch-offset-pair-bronze-anodized","title":"Push Pull Handle FHC 891348AA – 48-Inch Offset Pair Bronze Anodized","description":"\u003cp\u003eSpecial order. Stock is confirmed after checkout. Email customerservice@emergencydoorandglassrepair.com if you are unsure this is the correct part. Orders over $5,000 can be paid by ACH; other orders use card checkout.\u003c\/p\u003e\n\u003cp\u003e48-inch offset push\/pull handle pair in bronze anodized. This listing is the specific finish SKU \u003cstrong\u003e891348AA\u003c\/strong\u003e. FHC finish code AA is bronze anodized. CA is the clear-anodized sibling (891348CA).\u003c\/p\u003e\u003ch3\u003eManufacturer identification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: FHC\u003c\/li\u003e\n\u003cli\u003eOfficial manufacturer part number: \u003cstrong\u003e891348AA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSeries: 8913 tubular push\/pull combo\u003c\/li\u003e\n\u003cli\u003eProduct category: Offset push\/pull handle pair\u003c\/li\u003e\n\u003cli\u003eUnit: Pair \/ set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVerified specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLength: 48 in push, sized for 48 in doors (FHC product page \/ DK Hardware)\u003c\/li\u003e\n\u003cli\u003ePull: 10 in offset pull\u003c\/li\u003e\n\u003cli\u003eStyle: 1 in diameter tubular, 2-1\/2 in projection, for 1-3\/4 in thick doors\u003c\/li\u003e\n\u003cli\u003eFinish code: AA = bronze anodized. Not clear anodized.\u003c\/li\u003e\n\u003cli\u003eDoor type: commercial storefront \/ aluminum entrance. FHC states 200 \/ 300 \/ 500 series stile doors.\u003c\/li\u003e\n\u003cli\u003eHanding: pair — confirm mounting orientation\u003c\/li\u003e\n\u003cli\u003eDoor width \/ weight \/ spindle \/ hold-open \/ opening degree: not applicable to this handle pair\u003c\/li\u003e\n\u003cli\u003eFHC page weight: 5.00 (unit not labeled as lb on the page text reviewed)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePush\/pull pair. FHC catalog states mounting hardware included. Confirm on the packed part.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eOptional \/ sold separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMatching lock, closer, and sweep\u003c\/li\u003e\n\u003cli\u003eLos Angeles-area installation — request a quote; not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation requirements\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eConfirm door thickness, hole pattern, and finish before drilling.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty terms\u003c\/h3\u003e\u003cp\u003eNot stated on the FHC product page reviewed August 17, 2026.\u003c\/p\u003e\u003ch3\u003eReturn restrictions\u003c\/h3\u003e\u003cp\u003eInstalled or drilled handles are likely non-returnable.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e48-inch pair. Shipping is calculated separately. This listing does \u003cstrong\u003enot\u003c\/strong\u003e include free shipping.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003eCommercial door hardware is application-specific. Verify manufacturer, model, dimensions, handing, spindle, door type, and existing installation before ordering. If uncertain, text clear photos and measurements to 310-933-2600. Identification assistance does not replace field verification.\u003c\/p\u003e\u003ch3\u003eNeed help?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eText photos for identification: 310-933-2600\u003c\/li\u003e\n\u003cli\u003eEmail installation quotes and order questions to customerservice@emergencydoorandglassrepair.com. Replies are by email only.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FHC","offers":[{"title":"Default Title","offer_id":43064346280032,"sku":"891348AA","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/1231\/1648\/files\/891348aa.jpg?v=1787001770"},{"product_id":"setting-blocks-fhc-nsb563-neoprene-storefront-glass-setting-blocks","title":"Setting Blocks FHC NSB563 – Neoprene Storefront Glass Setting Blocks","description":"\u003cp\u003eSpecial order. Stock is confirmed after checkout. Email customerservice@emergencydoorandglassrepair.com if you are unsure this is the correct part. Orders over $5,000 can be paid by ACH; other orders use card checkout.\u003c\/p\u003e\n\u003cp\u003eNeoprene setting blocks for storefront glass. Size, durometer, and pack quantity must match the glass and pocket. These are not a gasket and will not weather the opening by themselves.\u003c\/p\u003e\u003ch3\u003eManufacturer identification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: FHC\u003c\/li\u003e\n\u003cli\u003eOfficial manufacturer part number: \u003cstrong\u003eNSB563\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct category: Setting blocks\u003c\/li\u003e\n\u003cli\u003eUnit: Pack — confirm quantity before sale\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVerified specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: neoprene (confirm against the packed part)\u003c\/li\u003e\n\u003cli\u003eUse: support glass in a storefront pocket\u003c\/li\u003e\n\u003cli\u003eExact size and pack count: confirm on the FHC page before sale\u003c\/li\u003e\n\u003cli\u003eWarranty noted in research: 1 year on the FHC page reviewed August 16, 2026 — reconfirm before advertising\u003c\/li\u003e\n\u003cli\u003eHanding \/ spindle \/ hold-open \/ opening degree: not applicable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSetting blocks only (gasket sold separately)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eOptional \/ sold separately\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFHC 7700RL glazing gasket\u003c\/li\u003e\n\u003cli\u003eLos Angeles-area installation — request a quote; not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation requirements\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePlace per glazing practice at the correct bite. Glass work should be performed by a qualified installer.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty terms\u003c\/h3\u003e\u003cp\u003eResearch noted a 1-year statement on the FHC NSB563 page reviewed August 16, 2026. Reconfirm before advertising.\u003c\/p\u003e\u003ch3\u003eReturn restrictions\u003c\/h3\u003e\u003cp\u003eOpened packs are likely non-returnable.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShipping weight: not stated\u003c\/li\u003e\n\u003cli\u003eShipping is calculated separately. This listing does \u003cstrong\u003enot\u003c\/strong\u003e include free shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003eCommercial door hardware is application-specific. Verify manufacturer, model, dimensions, handing, spindle, door type, and existing installation before ordering. If uncertain, text clear photos and measurements to 310-933-2600. Identification assistance does not replace field verification.\u003c\/p\u003e\u003ch3\u003eNeed help?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eText photos for identification: 310-933-2600\u003c\/li\u003e\n\u003cli\u003eEmail installation quotes and order questions to customerservice@emergencydoorandglassrepair.com. Replies are by email only.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FHC","offers":[{"title":"Default Title","offer_id":43064346312800,"sku":"NSB563","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/1231\/1648\/files\/nsb563-prod-1_10.jpg?v=1786990063"},{"product_id":"narrow-stile-aluminum-door-pair-fhc-d2210p103sa-74-x-84-satin-anodized-offset-pivots","title":"Narrow Stile Aluminum Door Pair FHC D2210P103SA – 74 x 84 Satin Anodized Offset Pivots","description":"\u003cp\u003eSpecial order. Stock is confirmed after checkout. Email customerservice@emergencydoorandglassrepair.com if you are unsure this is the correct part. Orders over $5,000 can be paid by ACH; other orders use card checkout.\u003c\/p\u003e\u003cp\u003eCommercial aluminum storefront door pair for contractors and project buyers who need a stock 200 Series narrow-stile opening. Glass, frame, closer, and extra hardware are not included unless listed here.\u003c\/p\u003e\u003ch3\u003eManufacturer identification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: FHC (Frameless Hardware Company)\u003c\/li\u003e\n\u003cli\u003eOfficial manufacturer part number: \u003cstrong\u003eD2210P103SA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUnit: Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVerified specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeries: 200 narrow stile (2-5\/8 in stile)\u003c\/li\u003e\n\u003cli\u003eConfiguration: Pair of aluminum doors\u003c\/li\u003e\n\u003cli\u003eSize: 74 in wide x 84 in high\u003c\/li\u003e\n\u003cli\u003eTop rails: 2-1\/4 in\u003c\/li\u003e\n\u003cli\u003eBottom rails: 10 in\u003c\/li\u003e\n\u003cli\u003eGlass stops: 1 in\u003c\/li\u003e\n\u003cli\u003eHinge type: Offset pivots\u003c\/li\u003e\n\u003cli\u003eFinish: Satin anodized\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNot included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGlass\u003c\/li\u003e\n\u003cli\u003eFrame, closer, and extra hardware unless separately quoted\u003c\/li\u003e\n\u003cli\u003eInstallation labor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNeed a full storefront kit?\u003c\/h3\u003e\u003cp\u003eFraming, transoms, and complete door-and-frame packages are built to your opening size. Message us with your dimensions for a custom storefront kit quote including framing.\u003c\/p\u003e\u003ch3\u003eWarranty terms\u003c\/h3\u003e\u003cp\u003eThe manufacturer product page lists a 2-year warranty. That is the manufacturer term, not a separate SOS Storefront Supply warranty.\u003c\/p\u003e\u003ch3\u003eReturn restrictions\u003c\/h3\u003e\u003cp\u003eRestocking is only considered if the box is unopened. Opened or installed doors are likely non-returnable.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFreight ships to the address on the order, not our shop, unless you request otherwise.\u003c\/li\u003e\n\u003cli\u003eShipping is calculated separately. This listing does not include free shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003eCommercial door hardware is application-specific. Verify manufacturer, model, dimensions, handing, spindle, door type, and existing installation before ordering. If uncertain, text clear photos and measurements to 310-933-2600. Identification assistance does not replace field verification.\u003c\/p\u003e\u003ch3\u003eNeed help?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEmail order questions to customerservice@emergencydoorandglassrepair.com. Replies are by email only.\u003c\/li\u003e\n\u003cli\u003eText photos for part identification: 310-933-2600\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalifornia Proposition 65 warning appears on the manufacturer product page.\u003c\/p\u003e","brand":"FHC","offers":[{"title":"Default Title","offer_id":43108533436512,"sku":"D2210P103SA","price":1868.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/1231\/1648\/files\/d2210p-1w_1.jpg?v=1788016665"},{"product_id":"medium-stile-aluminum-door-pair-fhc-d3410ph-72-x-84-continuous-hinge","title":"Medium Stile Aluminum Door Pair FHC D3410PH – 72 x 84 Continuous Hinge","description":"\u003cp\u003eSpecial order. Stock is confirmed after checkout. Email customerservice@emergencydoorandglassrepair.com if you are unsure this is the correct part. Orders over $5,000 can be paid by ACH; other orders use card checkout.\u003c\/p\u003e\u003cp\u003eCommercial aluminum storefront door pair, 300 Series medium stile, with continuous hinge. Glass, frame, closer, and extra hardware are not included unless listed here.\u003c\/p\u003e\u003ch3\u003eManufacturer identification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer: FHC (Frameless Hardware Company)\u003c\/li\u003e\n\u003cli\u003eOfficial manufacturer part number: \u003cstrong\u003eD3410PH\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUnit: Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVerified specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeries: 300 medium stile (3-3\/4 in stile)\u003c\/li\u003e\n\u003cli\u003eConfiguration: Pair of aluminum doors\u003c\/li\u003e\n\u003cli\u003eSize: Standard pair 72 in wide x 84 in high\u003c\/li\u003e\n\u003cli\u003eTop rails: 3-3\/4 in\u003c\/li\u003e\n\u003cli\u003eBottom rails: 10 in\u003c\/li\u003e\n\u003cli\u003eGlass stops: 1\/4 in\u003c\/li\u003e\n\u003cli\u003eHinge type: Continuous hinge\u003c\/li\u003e\n\u003cli\u003eIncluded per manufacturer page: continuous hinge, push\/pull, and 3-point lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNot included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGlass\u003c\/li\u003e\n\u003cli\u003eFrame, closer, and extra hardware unless separately quoted\u003c\/li\u003e\n\u003cli\u003eInstallation labor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNeed a full storefront kit?\u003c\/h3\u003e\u003cp\u003eFraming, transoms, and complete door-and-frame packages are built to your opening size. Message us with your dimensions for a custom storefront kit quote including framing.\u003c\/p\u003e\u003ch3\u003eWarranty terms\u003c\/h3\u003e\u003cp\u003eThe manufacturer product page lists a 2-year warranty. That is the manufacturer term, not a separate SOS Storefront Supply warranty.\u003c\/p\u003e\u003ch3\u003eReturn restrictions\u003c\/h3\u003e\u003cp\u003eRestocking is only considered if the box is unopened. Opened or installed doors are likely non-returnable.\u003c\/p\u003e\u003ch3\u003eShipping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFreight ships to the address on the order, not our shop, unless you request otherwise.\u003c\/li\u003e\n\u003cli\u003eShipping is calculated separately. This listing does not include free shipping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility warning\u003c\/h3\u003e\u003cp\u003eCommercial door hardware is application-specific. Verify manufacturer, model, dimensions, handing, spindle, door type, and existing installation before ordering. If uncertain, text clear photos and measurements to 310-933-2600. Identification assistance does not replace field verification.\u003c\/p\u003e\u003ch3\u003eNeed help?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEmail order questions to customerservice@emergencydoorandglassrepair.com. Replies are by email only.\u003c\/li\u003e\n\u003cli\u003eText photos for part identification: 310-933-2600\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalifornia Proposition 65 warning appears on the manufacturer product page.\u003c\/p\u003e","brand":"FHC","offers":[{"title":"Default Title","offer_id":43108533502048,"sku":"D3410PH","price":2171.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0676\/1231\/1648\/files\/d3410phdu-1w_1.jpg?v=1788016666"}],"url":"https:\/\/sosstorefrontsupply.com\/collections\/most-ordered-by-hotels.oembed","provider":"S.O.S. STOREFRONT PROTECTION SHOP","version":"1.0","type":"link"}